Ford Probe 2.0L Starter Turbo Kit W/ Megasquirt

[tyler524]

Well I had purchased this a few years ago, I was in the process of building a new motor and redoing the car. I put a spare motor in it after I finished the body work and what would you know, a week later it gets totaled. I never got a chance to install it. I also have a megasquirt that I built including the stimulator board and a usb port add on. Everything tested fine just never got a chance to get it on before the car was totaled. I am willing to deal so make me an offer. I have had all this sitting in a box in the garage and am looking to get rid of it and buy a new body for my motorcycle.

NOTE: This is an INCOMPLETE Turbo 'package' for a 2nd Gen 2.0 but definitely a great start for someone looking to boost

Package price = $700obo + shipping

The package includes:
JGS Turbo Manifold
- JGS Stage 1.4 Turbo Header Kit w/ T25 Turbo Flange
- minor surface rust from sitting around
- would look excellent with a few coats of high-temp paint
- clean welds
- Retail = $198 shipped UN-WELDED
Garrett T25 Turbo w/ Wastegate Actuator
- 95-99 DSM Eclipse Turbo
- Removed from a very low mileage (less than 50k) 97 Eclipse GS-T
- excellent condition, spins freely with no shaft play
- All NEW gaskets and 'newer' bolts
- Includes oil drain flange and gasket
- Also includes an Earl's brand fitting for the oil feed line
(3) 2.25" Blue Purosil 4-ply Polyester Reinforced Silcone Couplers
- Working Pressure = 65 PSI
- Burst Pressure = 175 PSI
- Temperature Range = up to 350 F
- Inner Diameter = 2.25"
- Length = 2.75"
Fernco TB to MAF Reducer
- works well when going from the throttle body intake piping elbow to the MAF.
90-94 1g DSM BOV w/ Steel Flange & Gasket
- This Blow off valve will hold up to 20PSI, which is more than this turbo is capable of.
- Never been crushed
2.25" Braid Covered Exhaust Flex Section
- great addition to your custom downpipe
2.25" 90 degree Aluminized Steel Elbow
- just a leftover piece that could be used to help create a custom downpipe
NGK 7mm Blue Spark Plug Wires w/ Bosch Charcoal Coil Wire
- excellent condition w/ less than 5k miles
- NGK-8179
- Summit Racing sells them for $57
Misc. Vacuum Line and Steel Braided Line
-Megasquirt I v2.2 with usb add on & Stiumlator Board v2.2

*FMU Does not come with it*

[Zach]

all probes are beat to shit. good luck with sale

[tyler524]

**Note** This will also fit on a Mazda Mx6

[CattaniAFJ]

Mazdas are also beat to shit. GLWS.

[MattKatz]

Let me see some pics.

[tyler524]

Pics are up

[DTM Brian]

Looks like my probe could use some boost. No need for the mega squirt. I have the software to flash the stock ecm.

[tyler524]

Originally Posted by DTM Brian

Looks like my probe could use some boost. No need for the mega squirt. I have the software to flash the stock ecm.

I'm willing to deal and sell without the megasquirt. I posted it on the probe forums too and figured most of the people on there would want it.

[tyler524]

Bump for boost

[redkow97]

i'm mostly curious because my first car was a '93 PGT, but what kind of power does a turbo I4 variant put out?

if memory serves, the GT made 165hp from its 2.5 liter V6 powerplant. probably around 6k RPM.